| Grip warmers are a great invention for ATV lovers | | | | the throttle lever and press on it. Place the shrink |
| who just can't stop ridding in the cold winter months. | | | | wrap over the whole throttle lever not just the |
| Even with ridding gloves and hand guards you can | | | | heating pad. Heat it with a heat gun if you have one, |
| get cold. That is why we suggest investing in a set | | | | for about 20 sec. or else use a hair dryer. The shrink |
| of grip warmers. They can make the difference | | | | wrap will shrink to mold perfectly the shape of the |
| between a nice ATV ride on a chilly day and a bone | | | | ATV's throttle lever. |
| chilled ride. | | | | Find a good place to secure the wiring around the |
| A basic set of grip warmers cost about 140$ and the | | | | handle bars of the ATV. Test to see if it is Free. |
| installation time is about an hour. Anybody can do this | | | | Move the handle bars from side too side to make |
| it is simple and straight forward. First you have to | | | | sure that you have the liberty to make big |
| remove the existing grips off your ATV. An easy | | | | movement and that the wires don't get stuck or |
| way to do this is by taking a razor blade and slicing | | | | kinked. Once you have found the best place tie them |
| an opening from the top to the bottom. Then peel | | | | with the cable ties supplied in the kit. |
| them off. If there is any glue or rubber left on the | | | | Finally place the controller boxes on the ATV in a |
| bar it will have to be cleaned off. Using the razor | | | | place that you can read and have access easily. Most |
| blade it can be scraped off or sanded off with | | | | control boxes have a setting for the grips and |
| sandpaper. Now you are ready to install the new grip | | | | another for the thumb warmer. Some have a |
| warmers on your ATV. To help you slip them on | | | | temperature range that can be adjusted and others |
| spray some WD-40 on the bar handles of the ATV. | | | | only have the on/off settings. |
| Slip them on with force. | | | | So this is it' your grip warmers should be installed in |
| The thumb warmer has a little pad that will stick to | | | | less than an hour. Spring is a good time to profit |
| the throttle lever. Make sure it is as clean as possible. | | | | from the sales on the left over winter inventory. You |
| Then place the sticky side of the heating pad against | | | | are now ready to go out and enjoy your ATV. |