Tips on Using Motorcycle Jacks

If you are one of many motorcycle enthusiasts whoeven stand on either end of motorcycle without
enjoy working on bikes, then consider buying aworrying that it would tip.
motorcycle jack. It's one of the most important toolsIt is not hard to look for motorcycle jacks that have
to have the garage in order to safely work onthese features, since most manufacturers think it
motorcycles.their responsibility to make their products safe to
A motorcycle jack is a smaller version of a regularuse. Most motorcycle jacks available in the market
jack used for fixing cars or trucks, but motorcyclehave these two safety features.
enthusiasts are always warned not to use regularHere are some things to keep in mind while using a
jacks on their bikes. These jacks are made up ofmotorcycle jack:
crisscrossing metal which can be rolled under the- Prevent the motorcycle from rolling off the jack
center of a motorcycle. The upper part of the jack isstand by placing a block of wood behind rear tire.
raised hydraulically to touch the undercarriage and- Keep the center the jack, during the down position,
raise the whole motorcycle.under the motorcycle's block.Prevent motorcycles
Jacks made for motorcycles can be used in generalfrom falling onto their sides when it is raised by using
maintenance tasks like changing the oil, as well as ina long rope to attach one end of the handle bars, up
doing modifications like installing shocks or painting theover the garage's rafters, and the other end of the
whole unit.handle bars.
For the sake of safety, a good ATV motorcycle- To raise the motorcycle off the ground, turn the
jack should have these two features:jack's hydraulic release valve towards the right. Pump
- A safety lock that will never allow the accidentalthe jack handle repeatedly until the motorcycle is at
release of the jack and can drop the motorcycle onthe height you want.
whoever is working on it; and- To lower the motorcycle to the ground, turn the
- Some sort of strap or tie-down that goes up andhydraulic release valve very slowly to the left until
over the motorcycle and locks it to the jack. Thisyou can slide the jack out from beneath the
allows anyone working on the bike to wrench on it ormotorcycle.